DESCRIPTION
D"  x  L"
PART
NUMBER
WEIGHT (lbs.)
PER 1000
FERRULE SPECIFICATIONS
FERRULE
CODE
B D G M
3/8 x 10 1/8 DA-037-1012 288 FF-037 .505 .640 .234 .390
3/8 x 12 1/8 DA-037-1212 344
3/8 x 18 1/8 DA-037-1812 515
3/8 x 24 1/8 DA-037-2412 685
3/8 x 30 1/8 DA-037-3012 897
3/8 x 38 1/8 DA-037-3612 1029
3/8 x 48 1/8 DA-037-4812 1394
1/2 x 8 1/8 DA-050-0812 451 FF-050 .650 .795 .250 .438
1/2 x 10 1/8 DA-050-1012 529
1/2 x 12 1/8 DA-050-1212 680
1/2 x 18 1/8 DA-050-1812 972
1/2 x 24 1/8 DA-050-2412 1292
1/2 x 30 1/8 DA-050-3012 1560
1/2 x 36 1/8 DA-050-3612 1879
1/2 x 42 1/8 DA-050-4212 2174
1/2 x 48 1/8 DA-050-4812 2502
5/8 x 12 3/16 DA-062-1218 997 FF-062 .785 1.030 .328 .516
5/8 x 18 3/16 DA-062-1818 1633
5/8 x 24 3/16 DA-062-2418 2136
5/8 x 30 3/16 DA-062-3018 2666
5/8 x 36 3/16 DA-062-3618 3196
5/8 x 42 3/16 DA-062-4218 3482
5/8 x 48 3/16 DA-062-4818 3962
3/4 x 12 3/16 DA-075-1218 1525 FF-075 1.215 1.030 .469 .656
3/4 x 18 3/16 DA-075-1818 2280
3/4 x 24 3/16 DA-075-2418 3032
3/4 x 30 3/16 DA-075-3018 3780
3/4 x 36 3/16 DA-075-3618 4530
APPLICATION Deformed bar anchors are designed for weld and bearing plates in concrete connections.
FERRULES All orders for studs include ferrules.
MATERIAL Low carbon steel, ASTM A-496
MECHANICAL
PROPERTIES
TENSILE STRENGTH 80,000 PSI MIN (552 MPa)
YIELD STRENGTH (0.5% OFFSET) 70,000 PSI MIN (485 MPa)
STUD LENGTH REDUCTION

Specified lengths are before weld.
Approximate length reduction after welding are:

Diameter Length
Reduction
1/2" or below 1/8"
5/8" 3/16"
OTHER NOTES Custom lengths available