STUD SPECIFICATIONS
(inches)
D L (min.) C FILLET DIMENSIONS
E F
10 - 24 25/32 .187 9/32 3/32
1/4 - 20 25/32 .187 23/64 7/64
5/16 - 18 25/32 .187 7/16 7/64
3/8 - 16 25/32 .187 1/2 1/8
7/16 - 14 25/32 .187 37/64 9/64
1/2 - 13 13/16 .187 11/16 5/32
5/8 - 11 31/32 .187 51/64 3/16
3/4 - 10 1-15/64 .187 15/16 1/4
7/8 - 9 1-1/2 .375 1-3/32 5/16
1 - 8 1-17/32 .375 1-15/64 3/8


FERRULE SPECIFICATIONS
(inches)
FERRULE
CODE
D B G M
FF-019 .390 .305 .234 .390
FF-025 .454 .380 .234 .390
FF-031 .578 .445 .234 .390
FF-037 .640 .505 .234 .390
FF-043 .703 .585 .234 .422
FF-050 .795 .650 .250 .438
FF-062 1.030 .785 .328 .516
FF-075 1.215 1.030 .469 .656
FF-087 1.408 1.210 .545 .732
FF-100 1.615 1.406 .633 .820
APPLICATION Full thread studs are used where close run-down of the nut is required.
FERRULES

All orders for studs include ferrules.

MATERIAL LOW CARBON STEEL (MS)
ASTM A-108 1010-1020.
STAINLESS STEEL (SS)
18-8.
Other specialized materials available;
please call 866-935-WELD (9353) for more information.
CALCULATING THE CORRECT STUD LENGTH TO ORDER
  1. Determine the after weld (AW) length required.
  2. For stud base diameters add to after weld length
    Up through 9/16" - 1/8"
    From 5/8" through 7/8" - 3/16"
    From 1" through 1-1/4" - 1/4"
HOW TO ORDER

To order, please refer to the drawing above and specify the following:

Full Thread: FT
Material
Diameter (C)
Thread Size (D)
Length Before Weld

Example: FT MS - 1/4 - 20 x 2 1/8