STUD SPECIFICATIONS
DESCRIPTION
D"  x  L"
PART
NUMBER
H A WEIGHT (lbs.)
PER 1000
1/4 x 1-1/8 HA-025x0112 .500 .187 24
1/4 x 2-11/16 HA-025x0268 43
1/4 x 4-1/8 HA-025x0412 65
3/8 x 1-3/8 HA-037x0137 .750 .281 69
3/8 x 1-5/8 HA-037x0162 75
3/8 x 2-1/8 HA-037x0212 93
3/8 x 2-5/8 HA-037x0262 108
3/8 x 3-1/8 HA-037x0312 126
3/8 x 4-1/8 HA-037x0412 155
3/8 x 6-1/8 HA-037x0612 218
1/2 x 1-1/8 HA-050x0112 1.000 .281 114
1/2 x 1-5/8 HA-050x0162 130
1/2 x 2-1/8 HA-050x0212 170
1/2 x 2-5/8 HA-050x0262 197
1/2 x 3-1/8 HA-050x0312 226
1/2 x 3-5/8 HA-050x0362 259
1/2 x 4-1/8 HA-050x0412 292
1/2 x 5-5/16 HA-050x0531 341
1/2 x 6-1/8 HA-050x0612 393
1/2 x 8-1/8 HA-050x0812 504
1/2 x 10-1/8 HA-050x01012 680
5/8 x 1-7/16 HA-062x0143 1.250 .312 208
5/8 x 2-11/16 HA-062x0268 315
5/8 x 3-3/16 HA-062x0318 360
5/8 x 4-3/16 HA-062x0418 450
5/8 x 5-3/16 HA-062x0518 560
5/8 x 6-9/16 HA-062x0656 652
5/8 x 8-3/16 HA-062x0818 793
5/8 x 10-3/16 HA-062x01018 1036


FERRULE SPECIFICATIONS
FERRULE
CODE
D B G M
FF-025 .454 .380 .234 .390
FF-037 .640 .505 .234 .390
FF-050 .795 .650 .250 .438
FF-062 1.030 .785 .328 .516
 
APPLICATION Headed anchors are used in all types of concrete connections. They can be welded to a flat surface, in a fillet or on the heal of an angle.
FERRULES All orders for studs include ferrules. For ferrule specifications for welding in the fillet or on the heel of an angle please consult one of our representatives.
MATERIAL Low carbon steel, ASTM A108, 1010-1020. Also available in stainless steel.
OTHER NOTES Custom lengths available
MECHANICAL
PROPERTIES
TENSILE STRENGTH - 65,000 PSI MIN (450 MPa)
YIELD STRENGTH (.2% OFFSET)- 51,000 PSI MIN (350 MPa)
ELONGATION (% IN 2 IN.) 20% (% IN 5x DIA.) 15% MIN.
REDUCTION OF AREA 50% MIN
STUD LENGTH REDUCTION

Specified lengths are before weld.
Approximate length reduction after welding are:

Diameter Length
Reduction
1/2" or below 1/8"
5/8" 3/16"