Weld Pins
| SPECIFICATIONS (inches) |
|||
|---|---|---|---|
| SIZE | D | STEEL FD |
ALUM. FD |
| 14GA | .080 | .160 | – |
| 12GA | .105 | .180 | .230 |
| 10GA | .135 | .195 | .250 |
Annealing
Pins are annealed where required. Does not apply to Stainless.Mechanical Properties
LOW CARBON STEEL
TENSILE STRENGTH 60,000 psi (min.), YIELD 50,000 psi (min.), ELONGATION 20% (in 2 inches)
STAINLESS STEEL
Values for various grades available upon request.
ALUMINUM
Values for various alloys available upon request.
Plating
Galvanized and Copper plating is standard. Does not apply to Stainless.Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.Material
LOW CARBON STEEL
C – 0.23% max., P – 0.04% max., Mn – 0.90% max., S – 0.05% max.
STAINLESS STEEL
AISI grade – 302/304/305 std. Other grades available upon request.
ALUMINUM
ALLOY-1110-H14 std. Other alloys available upon request.
Application
This is the standard weld pin used for most applications.
How to Order
To order, please refer to the drawing above and specify the following: Weld Pin: WP, Material, Diameter (D), Length (L)
Example: WP MS – 12GA x 1