Headed Anchor

STUD SPECIFICATIONS
DESCRIPTION D” x L”	PART NUMBER	H	A	WEIGHT (lbs.) PER 1000
1/4 x 1-1/8	HA-025×0112	.500	.187	24
1/4 x 2-11/16	HA-025×0268			43
1/4 x 4-1/8	HA-025×0412			65
3/8 x 1-3/8	HA-037×0137	.750	.281	69
3/8 x 1-5/8	HA-037×0162			75
3/8 x 2-1/8	HA-037×0212			93
3/8 x 2-5/8	HA-037×0262			108
3/8 x 3-1/8	HA-037×0312			126
3/8 x 4-1/8	HA-037×0412			155
3/8 x 6-1/8	HA-037×0612			218
1/2 x 1-1/8	HA-050×0112	1.000	.281	114
1/2 x 1-5/8	HA-050×0162			130
1/2 x 2-1/8	HA-050×0212			170
1/2 x 2-5/8	HA-050×0262			197
1/2 x 3-1/8	HA-050×0312			226
1/2 x 3-5/8	HA-050×0362			259
1/2 x 4-1/8	HA-050×0412			292
1/2 x 5-5/16	HA-050×0531			341
1/2 x 6-1/8	HA-050×0612			393
1/2 x 8-1/8	HA-050×0812			504
1/2 x 10-1/8	HA-050×01012			680
5/8 x 1-7/16	HA-062×0143	1.250	.312	208
5/8 x 2-11/16	HA-062×0268			315
5/8 x 3-3/16	HA-062×0318			360
5/8 x 4-3/16	HA-062×0418			450
5/8 x 5-3/16	HA-062×0518			560
5/8 x 6-9/16	HA-062×0656			652
5/8 x 8-3/16	HA-062×0818			793
5/8 x 10-3/16	HA-062×01018			1036

FERRULE SPECIFICATIONS
FERRULE CODE	D	B	G	M
FF-025	.454	.380	.234	.390
FF-037	.640	.505	.234	.390
FF-050	.795	.650	.250	.438
FF-062	1.030	.785	.328	.516

Ferrules

All orders for studs include ferrules. For ferrule specifications for welding in the fillet or on the heel of an angle please consult one of our representatives.

Mechanical Properties

TENSILE STRENGTH – 65,000 PSI MIN (450 MPa)
YIELD STRENGTH (.2% OFFSET) – 51,000 PSI MIN (350 MPa)
ELONGATION (% IN 2 IN.) 20% (% IN 5x DIA.) 15% MIN.
REDUCTION OF AREA 50% MIN

Material

LOW CARBON STEEL | ASTM A108, 1010-1020.

Also available in stainless steel.

Application

Headed anchors are used in all types of concrete connections. They can be welded to a flat surface, in a fillet or on the heal of an angle.

Other Notes

Custom lengths available

Stud Length Reduction

Specified lengths are before weld.
Approximate length reduction after welding are:

Diameter	Length Reduction
1/2″ or below	1/8″
5/8″	3/16″