• Extremely easy to operate
  • Highly mobile unit with compact dimensions and 50% weight savings over conventional stud welding units.
  • Robust metal housing withstands rough treatment in shop and on site.
  • Especially suitable for thicker sheets of about 2 mm or higher.

Please inquire about availability in your region.

Stud Diam. Range

14ga - 7/8"

#4 - 1"


2000 A (max.)

Weld Rate

Dia. 7/8'' = 7 studs/min


480/460 V
3 phases
50/60 Hz


63 AT (alternative input voltages available)

Time Control

5 - 1500 ms

Current Control

300 - 2000 A


  • Microcontroller for precise process times, optimal functional reliability and maximum operating convenience.
  • Function monitoring for automatic function test following power-up and monitoring all internal system functions.
  • Lift test for gap welding guns and stud welding heads
  • Library function for automatic specification of welding current and welding time through selection of stud diameter according to welding range (with and without shielded gas). Fine adjustment via arrow keys.
  • Process monitoring for recording and analysis of factors affecting the welding process. After each weld, the reference and actual values are compared; display of the welding energy input; switchable automatic welding stop if limits are exceeded.
  • RS232 interface for data output. Data and time of day are stored. Welding parameters of each weld are logged.
  • 4 gun connections are optional.


50.8" (1290mm) H x 22" (560mm) W x 25.6" (650mm) D
(excluding handle)


93-66-12096: 319.67 lbs (145 kg); 93-66-42096: 363.76 lbs (165 kg)

Please refer to the operator's manual before using.